Forum for users of Vectric products

Apr 17, 2013 · In the Vectric software that is a good idea. I don't know of any other technique for checkingthis. Typically, if you are creating the artwork to be used with the drag knife, you would …

Apr 12, 2007 · In VCarve Pro v3.1, is there a way to change the safe z height after the material is defined? I have one particular tool path that might be trouble and I wanted to add a little height to the …

Jun 7, 2009 · Mach 3 PP for Vcarve vs. Aspire by Woodbutcher-59 » Sun Jun 07, 2009 4:05 pm

Jan 5, 2014 · The actual gadget is installed to the "Public Documents\Vectric Files\Gadgets\VCarve Pro V7.0" folder. Might be worth checking that you don't have any permissions issues with that.

Jul 27, 2014 · Chazz, You talking about like THIS? If so linear array/circular array lines depending on bit diameter (make sure you node edit a single line to get starting point you want). And just use fluting …

Mar 3, 2020 · Vectric software DOES take into account material thickness already...so be careful of Topping Out if you don't have a Z-Prox functioning! SB3 doesn't know how thick your material …

May 12, 2014 · Spindle won't spin I have a newer PRS Standard (3.8.14) with spindle running Vectric Aspire (4.510). First time this has happened. After loading a cut file that worked fine yesterday …

Jan 18, 2014 · The guys at vectric worked for Delcam. Delcam cost around $7500 + support. Aspire is much easier to use and support is free. Don 01-18-2014, 02:19 PM #3 phil_o Senior Member

Mar 5, 2013 · The guys at Vectric are releasing their new versions. I was sent the new drag knife gadget to play with and test today. The tool works great and all within the cam software. Below are some …